Chapter 4: Selecting and Loading Paper
80
Selecting and Loading Paper
Auto Tear-Off (Set to Off) When Auto Tear-Off is off, press Tear Off/Store to manually move
the continuous form paper to the tear-off position.
1When your print job has finished, press Tear Off.
The continuous form moves to the tear-off position.
2Press Micro ↓ or Micro ↑ to move the paper to the position
you want on the tear bar.
3Press Start/Stop to set the tear-off position.
The printer beeps twice. The paper rolls backward, then goes
to the new tear-off position.
Auto Tear-Off (Set to One Second) When the print buffer has not received data for one second, Auto
Tear-Off automatically moves the continuous form paper to the
tear-off bar. The print line can be anywhere on the page for Auto
Tear-Off to function in this mode.
To change the Auto Tear-Off setting in One-Second mode:
1Press Start/Stop to take the printer offline.
2Press Micro ↓ or Micro ↑ to move the paper to the appropriate
position on the tear bar. The printer beeps if the paper is out of
range.
3Press Start/Stop to set and save the tear-off position.
The printer beeps twice. The paper rolls backward, then
advances to the new tear-off position. The Ready light comes
on.
If your application software has delays between data
transmissions while Auto Tear-Off is set to one second, partial
pages may print. To prevent this, set Auto Tear-Off to on.