Chapter 3: Using the Operator Panel
52
Using the Operator Panel
Setting and Using a Macro
You can use up to four macros to store your settings permanently. To set a
macro, follow these steps:
1Press Menu.
2Press Item ↓ until Default Macro appears.
3Press Next → and then Item ↓ until Macro x (x = 1 to 4) appears.
4Press Store to save the setting.
5Press Prev. ← and then Item ↓ until Macro x Options appears.
6Set and store your settings (see “Macro x Options” on page 40 for a
list of items you can set in your macro).
7Press Quit.
To use a macro:
1Press Menu.
2Press Item ↓ until Load Macro appears.
3Press Next → until Macro x (x = 1 to 4) appears.
4Press Store to save the setting.
5Press Quit.