Chapter 1: Getting Started
14
Getting Started
Changing the Serial Settings
1Turn the printer On.
2Press Menu to enter the function menu.
3Press Item ↓ until Interface Opt. appears on the display.
4Press Next → and the default interface setting appears.
5To change the default, press Next → and then Item ↓ until the
interface option you want appears. Press Store.
6Press Prev. ← to go back to the interface level.
7To change the serial settings:
aPress Item ↓ until Data speed (baud rate) appears.
bPress Next →.
cPress Item ↓ until the appropriate data speed setting
appears.
Menu/
Quit Tear Off
Store
Font
Item
Pitch
Item
Micro
Next ��
Micro
Prev.
Start/
Stop Load
Unload LineFeed FormFeed
Power
Ready
AutoGap
Tractor2
Check
Interface Opt.