Lexmark 75, 74 manual Printing troubleshooting, All-In-One is not communicating with the computer

All-In-One is not communicating with the computer

Disconnect and reconnect both ends of the USB cable (refer to your setup documentation for details).

Unplug the All-In-One from the electrical wall outlet, and then reconnect the power supply (refer to your setup documentation for details). Plug the All-In-One back in and turn the power back on.

Restart your computer. If problems still persist, see “Uninstalling and reinstalling the software” on page 25.

Printing troubleshooting

All-In-One prints slowly

Close all programs not in use. The memory resources may be too low.

Make sure your Print Properties Quality/Speed setting is set on Normal or Quick Print. See page 5 for help.

Try printing a smaller file. If the memory resources are too low, you may not be able to print a very large file. Consider purchasing more memory.

Note: If you scanned a photograph with your All-In-One, the file size could be too large to print with a selected scanning resolution higher than 300 dpi.

21