Lexmark E234N manual Replace photoconductor kit printer hard stop, Using the operator panel

Replace photoconductor kit (printer hard stop)

Light sequence:

•Continue—On

•Toner Low/Replace PC Kit—Blink

•Error—Blink

What this light sequence means:

The photoconductor kit’s drum is full and needs replacing. The printer will not print any more pages until the photoconductor kit is replaced.

What you can do:

Replace the photoconductor kit. (See “How to change a photoconductor kit” on page 108 for help.)

Unsupported toner cartridge / Toner cartridge is not installed

Light sequence:

•Toner Low/Replace PC Kit—On

•Error—On

What this light sequence means:

The toner cartridge is not installed, or the printer detects a toner cartridge error.

What you can do:

•If the toner cartridge is not installed, install it.

•If the toner cartridge is installed, remove it and install a new toner cartridge (see “How to change a toner cartridge” on page 104).

Using the operator panel

62