Industry Canada compliance statement
This Class B digital apparatus meets all requirements of t he Canadian Interference-Causing Equipment Standard
ICES-003.
Avis de conformité aux normes de l’industrie du Cana da
Cet appareil numérique de classe B est conforme aux exigences de la norme canadienne relative aux équipements
pouvant causer des interférences NMB-003.
European Community (EC) directives conformity
This product is in conformity with the protection requirements of EC Council directives 2004/108/EC and 2006/95/EC
on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility
and safety of electrical equipment designed for use within certain voltage limits.
The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA.
The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön f asor, Millennium
Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requir ements of the Directives is available upon
request from the Authorized Representative.
This product satisfies the Class B limits of EN 5502 2 and safety requirements of EN 60950.
Regulatory notices for wireless products
This section contains the following regulatory informatio n pertaining to wireless products that contain transmitt ers,
for example, but not limited to, wireless network cards or pro ximity card readers.
Exposure to radio frequency radiation
The radiated output power of this device is far below the radio fr equency exposure limits of the FCC and other regul atory
agencies. A minimum separation of 20 cm (8 inches) must be main tained between the antenna and any persons for
this device to satisfy the RF exposure requirements of the FCC and other regulatory agencies.
Industry Canada (Canada)
This device complies with Industry Canada specification RSS -210. Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must acce pt any interference, including interference that
may cause undesired operation of the device.
This device has been designed to operate only with the antenna provide d. Use of any other antenna is strictly prohibited
per regulations of Industry Canada.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from
windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to
licensing.
Notices
158