7Press .
8Press the arrow buttons until Custom Type <x> or another custom name appears, and then press .
Submitting changes appears, followed by Paper Menu.
9Press , and then press to return to the Ready state.
Setting the paper size and type
1Make sure that the printer is on and Ready appears.
2From the printer control panel, press .
3Press the arrow buttons until Paper Menu appears, and then press .
4Press the arrow buttons until Size/Type appears, and then press .
5Press the arrow buttons until the correct tray appears, and t hen press .
6Press when Size appears.
7Press the arrow buttons until the correct size appears, an d then press .
Submitting changes appears, followed by Size.
8Press the arrow buttons until Type appears, and then press .
9Press the arrow buttons until the correct type appears, and t hen press .
Submitting changes appears, followed by Type.
Configuring Univers al paper settings
The Universal Paper Size is a user-defined setting that lets you print on paper sizes that are not preset in the printer
menus. Set the Paper Size for the specified tray to Universal when the size you want is not available from the Paper
Size menu. Then, specify all of the following Universal size setting s for your paper:
Units of Measure (inches or millimeters)
Portrait Height and Portrait Width
Feed Direction
Note: The smallest supported Universal size is 76 x 127 mm (3 x 5 in.); the largest is 216 x 356 mm (8.5 x 14 in.).

Specify a unit of measure

1Make sure the printer is on and Ready appears.
2From the printer control panel, press .
3Press the arrow buttons until Paper Menu appears, and then press .
4Press the arrow buttons until Universal Setup appears, and then press .
5Press the arrow buttons until Units of Measure appears, and then press .
Loading paper and specialty media
40