Using the multipurpose feeder
1Push the feeder release latch to the left to open the multipurpose feeder.
2Grasp the extension, and pull it straight out until it is fully extended.
3Prepare the paper for loading.
Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper . Straighten
the edges on a level surface.
Hold transparencies by the edges and fan them. Straighten the edges on a level surface.
Note: Avoid touching the print side of transparencies. Be carefu l not to scratch them.
Flex a stack of envelopes back and forth to loosen them, and then fan them. Straighten the edges on a level
surface.
4Locate the stack height limiter and tab.
Note: Do not exceed the maximum stack height by forcing paper under the st ack height limiter.
Loading paper and specialty media
44