103Operations - TN3270E SETUP: NETWORK SETUP > SERVER INFO > Keep Alive Time
Keep Alive Time This Network Setup > Server Info option specifies the time in sec-
onds that expires between each keep alive signal sent to the host or
SNA gateway server. The Keep Alive Type setting specifies the type
of signal sent to the host.
Set this option to a value smaller than the session’s inactivity time-
out value defined on the host. The host parameter name is
KEEPALIVE OPTIONS. It resides in the host IP profile dataset:
SYS1.TCPPARMS(PROFILE).
This setting is not used if the Keep Alive Type is set to None.
Option Value Comments
45 * [1..32000] The range is 1 to 32000 seconds.