54Mainframe Installation Setup: Task 6B - Verifying the Mainframe/SNA Server Connection
Through the http (browser) user interface: Connect to the
print server by entering the print server address as the URL.
When the print server display appears, click Reports and
then Device Setttings.
IMPORTANT:
Powering the printer Off and On does not end
TCP/IP and Telnet sessions in an orderly manner .
To power the printer Off properly , select Menus >
Option Card Menu > SCS/TNe MENU >
COMMON SETUP > Disconnect Ses >
Disconnect Ses.
See: Disconnect Ses, page 80.
3From the main frame host give the following TCP/IP display
command:
D TCPIP,TCPIPNAME,TELNET,CONNECTION,PORT =
ALL
to see all active LU definitions to verify that the relevant LU
definition is active on the host.
4Check to be sure that the printer in question has been
defined—and activated—as a client on the SNA server.
Consult your SNA manual.