Lexmark SCTNE, TN3270E, TN5250E IDB Second Char (IDB Option 9)

195Operations - TN5250E SETUP: SCS OPTIONS > IDB Second Char (IDB Option 9)

IDB SecondChar (IDBOption 9)

This SCS Options > CSC Characters option defines the second

character in the CSC (Command String Characters) sequence. The

CSC is a unique two-character sequence, which opens the internal

IDB editor in the SCS/TNe Emulation. It must be used every time

IDB commands are sent to the SCS/TNe Emulation. The CSC is

also used in front of the Lead-in characters defined with option 171

and 172. Last of all the CSC is also used for passing single hex val-

ues to the printer, e.g. &%1B = <esc>.

The IDB option value is an ASCII character in the decimal range 33

- 126. Refer to “Appendix B - ASCII Character Table” on page282

for a complete list of characters and their values.

User IDB command:

Not supported

Parameter:

Not supported

Option Value IDB Value User IDB parameter

% * 37 [percent] Not supported