304Appendix - SCS TN5250eFont Table: Set Substituted Font ID
Parameter:
Example:
1 - 249
SETSUBFNT 86
NOTE:Font 86 needs to be present in the font table prior to
this command. The entire font definition (incl. string
before/after etc.) is transferred to font table position
3. For instance, if IBM font 67 was the font
previously stated in position 3, this is moved to
another position in the font table. It is, however, still
available with font ID 67, but all font IDs sent from
the system in the range 66-153, which are not
present in the SCS/TNe Emulation with a specific
font ID, are printed with the definition of font 86.