45Mainframe Installation Setup: Task 4 - Configuring the SCS Settings
Task 4 -
Configuring the
SCS Settings
Several SCS option values may need to be changed to properly for-
mat and print SCS jobs that do not contain formatting commands in
the job. The following three settings are usually the most important,
but there are many other possibilities.
TIP:
Refer to Operations Reference - TN3270E
SETUP: SCS3270 Defaults, page 153 to see the
differences in these settings.
A. To select Non-US SCS3270 Defaults
Factory defaults are US. To change or restore:
1Select Menus > Option Card Menu > SCS/TNe MENU >
TN3270E SETUP > TEST OPTIONS > SCS3270 Defaults.
2Scroll to the desired value. Touch Submit to save one of the
factory defaults.
3Exit the menu by touching Home.
TEST OPTIONS Option Default Value Recommended Value Comments
SCS3270 Defaults Do Not Restore Your preferred
defaults Choose between Do Not Restore *,
US-Default, or Non-US-Default