Make sure the print (blank) side is facing you.
Lexmark Z45
Printer overview |
Basic printing |
Printing ideas |
Maintenance |
Troubleshooting |
Notices |
Index |
Using this |
Guide... |
Printing ideas 55
Printing iron-on transfers
You can load up to 25 iron-on transfers, depending on the thickness of the iron-on transfers. You may want to print your image on plain paper before printing it on an iron-on transfer. This ensures you do not waste iron-on transfers perfecting the image you would like to print. When the image prints to your satisfaction, load the iron-on transfers.
Step 1: Load the iron-on transfers
•If your transfers came with instructions, read
them carefully.
• Make sure your transfers are not used or damaged.
•
•Load the iron-on transfers vertically against the right side of the paper support.
Note: Do not push the iron-on transfers too far into the printer.
•Squeeze and slide the paper guide to the left edge of the iron-on transfers.
www.lexmark.com
