Lexmark Z45
Printer overview |
Basic printing |
Printing ideas |
Maintenance |
Troubleshooting |
Notices |
Index |
Using this |
Guide... |
Troubleshooting 91
Printer is plugged in, but does not print
Make sure:
•The printer is on and the printer cable is securely attached at both ends. If your printer is connected to a network, make sure the Lexmark adapter is on and all indicator lights are on. For help, refer to the adapter documentation.
•The paper is loaded correctly and not pushed too far into the printer. For help, see Basic printing. If the paper is jammed, see Clearing paper misfeeds or jams.
•The printer is not being held or paused. To check the printer status: a From your desktop,
•The printer is set as the default printer. To set the printer as the default: a From your desktop, click the Lexmark Z45 printer icon.
b From the Printing menu, choose Select Default Printer.
After you check these items, try Printing a test page.
If the test page prints, the printer is functioning properly. If it does not print, see Test page does not print.
www.lexmark.com
