Installer Menu (Cont.)

When Hospital Mode is set to 0 (disabled), both the IR code that will control the TV and the speaker selection depend on the Installer Menu item 020 FEATURE LEVEL setting.

Note: The default setting (254) is not selectable in the Installer Menu. If you ever need to restore the default setting, you must set item 117 FACT DEFAULT to 1 to reload the factory default settings. See item 117 description for further information.

Note: In the Installer Menu, an informational code is displayed at the right of each Hospital Mode value. Each code consists of three characters. The first character—T, P, or B—identifies the speaker: TV, Pillow, or Both. The second character—Z, P, R,

or D—identifies the pillow speaker code: Zenith, Philips, RCA, or Disabled. The third character—1 or 2—identifies the bed number.

028 - CH. OVERIDE (Channel Override)

If set to 1, the user can select channels with either Channel Up/ Down or by direct keypad entry. If set to 0, only those channels that are active in the TV’s memory can be selected.

029 - OLD OCV (On Command Video™)

Set to 1 for operation with systems from On Command Corporation.

030 - ACK MASK

MPI Communication Parameter. When set to 1, enables ACK feature of MPI.

031 - POLL RATE

MPI Communication Parameter. Selects poll rate for MPI. Step size of 16 ms. Changing from default may affect communication via MPI.

032 - TIMING PULSE

MPI Communication Parameter. Sets baud rate for MPI. Step size of 4.3 uS. Changing from default may affect communication via MPI.

035 - COMPPORT EN. (Computer Port Enable)

Set to 1 to enable display panel HDMI 1 input. Set to 0 to disable display panel HDMI 1 input.

039 - REAR AUX EN. (Rear Aux Enable)

Set to 1 to enable display panel rear Aux (Video 1) input. Set to 0 to disable display panel rear Aux (Video 1) input.

046 - STRT AUX SRCE (Start Aux Source)

Sets the starting Aux source. When turned ON, the TV will tune to starting Aux source if item 004 STRT CHANNEL is set to 0.

1 = Video 1

4

= RGB

255 = Last Aux

3 = HDMI 1

5

= HDMI 2

 

Note: Above is applicable only if all Aux sources are enabled.

Note: This item is not available in the Installer Menu unless item 004 STRT CHANNEL is set to 0.

047 - AUX STATUS

Set to 1 for MPI Aux source to be reported as a channel number instead of channel 0. Set to 0 to disable Aux identification change. Controls MPI status channel response for Aux inputs.

053 - DIS. CH-TIME (Disable Channel-Time)

Set to 1 to disable the Channel-Time display; Channel-Time dis- play will not appear. Set to 0 to enable the Channel-Time display.

069 - EN. CH-T COL. (Enable Channel-Time Custom Color) Set to 1 to enable custom color for the Channel-Time display. Set to 0 to disable custom color for the Channel-Time display.

070 - FOR. CH-TIME (Channel-Time Display Foreground Color)

Set according to Color Chart:

 

 

0

= Black

3

= Cyan

6

= Yellow

1

= Blue

4

= Red

7

= White

2

= Green

5

= Violet

 

 

Note: If foreground color and background color are the same, the menu background will be transparent.

Note: Applies only to “Channel Not Available” message if item

073 CH NOT AVBLE is set to 1 (enabled). Also, items 070 FOR. CH-TIME and 071 BCK. CH-TIME are not available in the Installer Menu when item 069 EN. CH-T COL. is set to 0.

071 - BCK. CH-TIME (Channel-Time Display Background Color)

See description for item 070 FOR. CH-TIME above. The color chart is the same for both items.

073 - CH NOT AVBLE (Channel Not Available)

If set to 1 and item 028 CH. OVERIDE is set to 0, a “NOT AVAIL- ABLE” message is displayed when a user direct tunes a channel that is not in the channel scan list available in memory.

075 - REVERT CH (Revert to Start Channel)

If set to 1 and loss of MPI communication occurs, TV automati- cally tunes to the specified Start Channel.

Note: This item is not available in the Installer Menu when item 004 STRT CHANNEL is set to 255.

077 - QUICK SHUTOFF

Allows end user (patient) to turn OFF TV using mechanical (analog) Pillow Speaker Channel Up/Down buttons. Patient needs to press and hold either channel button for time determined by value set. Set to 0 to disable. Set from 1 to 17 to establish required hold time of button—from 2 seconds to 10 seconds in half-second increments.

Note: This item is not available in the Installer Menu when item 013 SCAN MODE is set to 0.

078 - UPN MSB (UPN Most Significant Byte)

User programmable number, most significant byte readable by MPI command. Note: Not linked to serial number.

24

206-4207

Page 148 Page 150
Page 149
Image 149
LG Electronics 42CQ610H, 32LQ630H, 22LQ630H, 26LQ630H owner manual Poll Rate
Page 148 Page 150

32LQ630H, 42CQ610H, 26LQ630H, 22LQ630H specifications

LG Electronics has long been a leader in the field of innovative display technology, and their latest lineup of smart TVs, including the 26LQ630H, 42CQ610H, 22LQ630H, and 32LQ630H, demonstrates this commitment to excellence. Each model in this series comes equipped with cutting-edge features and technologies aimed at enhancing the viewing experience, making them perfect additions to any household.

The LG 26LQ630H, with its compact 26-inch display, is ideal for smaller spaces such as kitchens or bedrooms. This model boasts Full HD resolution, ensuring crisp and clear images with vibrant colors. It utilizes LG's advanced display technologies, including various picture modes that allow users to customize their viewing experience based on the content being watched. Its built-in Wi-Fi capabilities enable seamless streaming from popular services, providing access to an extensive library of movies and shows.

Moving up in size, the 22LQ630H offers a slightly larger 22-inch screen, making it a great choice for those seeking a versatile TV that fits into various room layouts. Like the 26LQ630H, it features Full HD resolution and an array of picture enhancements, ensuring that viewers enjoy a sharp image quality. The inclusion of audio features, such as Dolby Audio support, elevates the sound experience, providing a fuller and more immersive audio landscape.

For a more expansive viewing experience, the 32LQ630H comes in at 32 inches, catering to those who desire a larger display without overwhelming their space. This model further enhances connectivity options, providing multiple HDMI and USB ports for easy connection to external devices like gaming consoles and soundbars. Its user-friendly interface is powered by webOS, offering a seamless navigation experience through streaming apps and channels with voice command capabilities.

The flagship 42CQ610H stands out with its larger 42-inch screen, delivering a striking visual performance that is perfect for entertaining guests or enjoying a cinematic experience at home. This model features LG's advanced AI Picture Pro technology, which automatically optimizes picture quality based on the environment and content type. The 42CQ610H also supports Smart Home compatibility, allowing users to link and control devices through their TV seamlessly.

In summary, LG's 26LQ630H, 22LQ630H, 32LQ630H, and 42CQ610H models showcase a range of sizes and features that cater to different viewer needs. Each model's incorporation of advanced display technology, versatile connectivity options, and smart features make them standout choices in the competitive landscape of modern television. With LG's commitment to quality and innovation, these smart TVs are poised to enhance any entertainment setup.
Top Page Image Contents