LG Electronics 22LQ630H, 32LQ630H Custom Master TV Setup Cont, Channel, Optional Run Auto Tuning

Custom Master TV Setup (Cont.)

(Continued from previous page)

3. (Optional) Run Auto Tuning.

Note: If you intend to use a USB memory device / .tlx file for cloning purposes, DO NOT run Auto Tuning. If you Teach a .tlx file with an auto-tuned/edited Channel Map to a Target TV, this will put the Target TV in FTG Mode via CPU. Proceed to step 6 to verify the TV setup. (Steps 4 and 5 are not applicable for .tlx files.)

If you run Auto Tuning with the intention to clone the resulting Channel Map, you must use a USB memory device / .tll file or a clone programmer for this cloning purpose.

a)To search for all available analog and digital channels, go to the Channel Menu, select the Auto Tuning option, and follow the on-screen instructions.

b)Use the Channel Edit option in the Channel Menu to edit the channel lineup, as necessary, to include only free to guest (non-encrypted) channels.

• Add/delete channels per your system requirements.

CHANNEL	Move	Enter
• Auto Tuning
• Manual Tuning
• Channel Edit
• Channel Label

Use Channel Menu options to run Auto Tuning, edit channels, and select channel icons.

•Use the Channel Label option in the Channel Menu to select the appropriate trademark/ icon for each channel’s Channel-Time on-screen display. Icons are available for familiar channels, such as ABC, CBS, NBC, etc. Identifiable labels (icons) should enable the end user to readily know what common networks are available.

Note: If you intend to clone the PTC and Installer Menu item 103 ATSC TUNE MODE is set for Physical Channel tuning (default and recommended setting), channels with minor channel numbers higher than 255 will not transfer correctly in step 4. If item 103 is set for Virtual Channel tuning and either the major or minor channel numbers are higher than 255, the channel(s) will not transfer correctly in step 4.

Note: If you intend to clone the PTC, you can add the channel icons in this step or as described in step 5. Also in step 5, you can add custom text labels for channels without icons.

4.Transfer the TV setup menu settings to the commercial controller (PTC): 2-5-5 + MENU Mode

Note: This step is essential for successful cloning using a USB memory device /

.tll file or a clone programmer. Without this step, the PTC will not contain any of the TV setup menu settings.

Note: The maximum number of channels (analog, digital, and Aux inputs) that can be transferred to the PTC is 141. An attempt to transfer more than 141 channels of any combination will result in a Channel Map of exactly 141 channels; any extra channels will not be available in the PTC Channel Map. For example, if you en- abled three Aux inputs in the Installer Menu and Auto Tuning found 141 channels, you must edit the Channel Map to decrease the number of analog/digital channels to (at most) 138.

(Continued on next page)

206-4207 17