LG Electronics 26LQ630H Vcr Setup, Antenna Connection, Antenna In, How to connect, How to use

VCR SETUP

V To avoid picture noise (interference), leave an adequate distance between the VCR and TV.

V If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all TVs and is not covered by warranty.

Antenna Connection

1. How to connect

ANTENNA IN

1	Connect the RF antenna out socket of the VCR to the				1
					ANT OUT
	ANTENNA IN socket on the TV.	IDEO	L	R
					ANT IN
2	Connect the antenna cable to the RF antenna in
	socket of the VCR.	Wall Jack			2

2. How to use

V Set VCR output switch to 3 or 4 and then tune TV to the

same channel number.	Antenna
V Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)

EXTERNAL EQUIPMENT SETUP

23