Reference: 26/32LQ630H Rear and Side Jack Panels

 

AUDIO IN (RGB/DVI)

AUDIOIN (RGB/DVI)

Audio connection for RGB or DVI

device.

 

RESET

UPDATE

RESET Initiates a hardware reset and turns the TV OFF.

UPDATE Restricted to software updates.

AV INRGB IN (PC) (AUDIO/VIDEO)/DVI IN 1IN 2USB IN . . . . . . . . . .. . . . . . . . . .

USB IN

Insert USB memory device for software updates, cloning purposes, FTG Mode via CPU configuration, picture/music entertainment, etc., as applicable.

RGB IN (PC)

Connection for RGB output from PC.

HDMI/DVI IN

Connection for HDMI/DVI output from external device.

AUDIO/VIDEO IN

(3.5 mm jack) Connect to video/audio output port on external device (use A/V adapter cable provided with TV).

USB IN Insert USB memory device for software updates, cloning purposes, FTG Mode via CPU configuration, picture/music entertainment, etc., as applicable.

 

ANTENNA IN

ANTENNA IN

PTCSERVICE CPUSERVICE

(SERVICEONLY)(SERVICEONLY)

Connect to

Antenna/CATV.

PTC SERVICE (SERVICE ONLY)

Restricted to PTC service updates.

CPU SERVICE (SERVICE ONLY)

Restricted to CPU service updates.

TV-LINK SPEAKEROUT CFG 8

GAME CONTROL/MPI

When the TV/EBL is in Pass-through Mode, the MPI function enables an external MPI control device (i.e., clone programmer, VOD/PPV STB, etc.) to control the TV. Game Control—EBL in LodgeNet PPV Mode only.

GAME CONTROL

/ MPI

PILLOW SPEAKER INPUT

Connect pillow speaker here.

PILLOW SPEAKER

SPEAKER OUT (8Ω)

(3.5 mm jack) Connect to 8 ohm speaker input. In its initial release, this stereo jack provides a mono speaker fixed- level, 1 watt output (audio -, audio +, w/ground shield) and is intended for special applications, such as a bathroom speaker with volume control. Later CPU & PTC software versions provide a selectable speaker output. See Reference section, “External Mono Speaker Setup,” for further information.

TV-LINK CFG

(3.5 mm jack) Use for direct PC-to-TV FTG configuration.

64

206-4207