Reference: Installer Remote Control Typical Key Functions

An LG Installer Remote (p/n: 124-213-07) is required to set up and operate the TV. The LG Installer Remote illustrated below shows typical remote control functions and is provided for reference only. This Installer Remote may vary from the Installer Remote supplied with the TV.

MUTE

Switches sound On or Off.

SAP  Analog Mode: Selects MTS sound (Mono, Stereo, or SAP). DTV Mode: Changes the audio language, if additional languages are available. *

INFO

Displays channel information. **

CC Activates subtitles, unless the Channel Preview/Banks Setup Menu is currently on the screen, in which case this option displays the Lock (V-Chip) Menu.

NUMBER Buttons (0 - 9) & DASH Use to enter a channel or program number.

Dash is used for sub-channel numbers such as 9-1, 9-2, etc.

FLASHBK (Flashback) Returns to the previously tuned channel.

Up/Down/Left/Right Arrows

Use to navigate on-screen menus and adjust TV settings.

*SAP notes:

•SAP settings are retained for individual analog channels when TV is turned Off/On.

•If SAP is selected and no SAP is provided, sound may not be heard on channel.

•Each analog channel may have its own SAP setting.

•Digital channels will reset to default audio language when TV is turned Off/On.

**The INFO feature is only applicable if the TV is configured for Pro:Centric operation.

MUTE POWER

CH

BANK PREVIEW GUIDE

SAP INFO CC

CH

OK

VOL VOL

CH

FLASHBK

TIMER MENU ALARM

ADJ

ADJ ADJ ADJ

BED1 BED2

POWER

Turns the TV On or Off.

BANK

Selects Channel Bank 1, 2, 3, or 4.

CH PREVIEW

Displays and exits the Channel Preview/Banks Setup Menu.

GUIDE

Function not supported on these TVs.

CHANNEL UP/DOWN

Changes channels based on channels in the channel lineup.

VOLUME UP/DOWN Increases/decreases sound level.

OK (Enter)

Use to direct tune channels and also to adjust TV settings.

TIMER

Sets the amount of time before the TV automatically turns itself Off.

MENU

Displays and removes the TV setup menus (or, if applicable, the Function Menu).

ALARM

Enables users to schedule a one-time “alarm” event, in which the TV turns itself On at the user-specified time.

Bed Switch

Set to Bed 1 or Bed 2 as applicable (per Installer Menu item 027 HOSPITAL MODE setting).

206-4207

67