ENGLISH

90EXTERNAL CONTROL DEVICE SETUP

12. OSD Select (Command: k l)

18. ISM Method (Command: j p)

 

To select OSD (On Screen Display) on/off.

 

To avoid having a fixed image remain on screen.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Transmission [k][l][ ][Set ID][ ][Data][Cr]

Transmission [ j ][p][ ][Set ID][ ][Data][Cr]

 

Data 00: OSD off

Data 01: OSD on

 

Data 02: Orbiter

 

 

 

 

 

 

 

 

 

 

 

04: White Wash

 

Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]

 

 

 

 

 

 

 

08: Normal

 

 

 

 

 

 

 

 

 

 

 

13. Remote Control Lock Mode (Command: k m)

 

 

20: Color Wash

 

 

 

 

 

 

 

 

Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x]

 

 

 

To lock the remote control and the front panel

 

 

 

 

 

 

 

 

 

 

 

 

controls on the set.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

19. Energy Saving (Command: j q)

 

Transmission [k][m][ ][Set ID][ ][Data][Cr]

 

 

 

 

 

 

 

 

To control the energy saving function.

 

Data 00: Lock off

Data 01: Lock on

 

 

 

Transmission [ j ][q][ ][Set ID][ ][Data][Cr]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]

 

 

 

 

Data 00: off

 

 

 

 

If you’re not using the remote control and front panel

 

 

 

 

 

 

01: Minimum

 

controls on the Monitor set, use this mode. When

 

 

 

 

 

02: Medium

 

main power is on/off, remote control lock is released.

 

 

 

 

 

03: Maximum

 

If Key Lock is on in the standby mode, TV will not

 

 

 

 

 

04: Auto/Intelligent sensor (depending on model)

 

turn on by POWER button of remote control and on

 

 

 

 

 

05: Screen off

 

the TV.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

14. Treble (Command: k r)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To adjust treble.

 

 

 

 

 

 

 

20. Auto Configuration (Command: j u)

 

You can also adjust treble in the AUDIO menu.

 

To adjust picture position and minimize image

 

 

 

 

 

 

 

 

 

 

shaking automatically. Auto configuration only works

 

Transmission [k][r][ ][Set ID][ ][Data][Cr]

 

 

 

 

 

 

 

 

 

 

in RGB-PC mode.

 

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal

 

 

 

 

 

 

 

 

 

 

 

Transmission [ j ][u][ ][Set ID][ ][Data][Cr]

 

 

 

 

code)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*Refer to “Real data mapping”.

 

Data 01: To set

 

 

 

 

 

 

 

 

 

 

 

Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]

Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]

15. Bass (Command: k s)

 

 

 

 

 

 

 

21. Channel Tuning (Command: m a)

 

To adjust bass.

 

 

 

 

 

 

 

 

To tune channel to following physical number.

 

You can also adjust bass in the AUDIO menu.

 

 

 

 

 

 

 

 

 

 

Transmission [m][a][ ][Set ID][ ][Data00][ ][Data01]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Transmission [k][s][ ][Set ID][ ][Data][Cr]

 

 

 

[ ][Data02][Cr]

 

 

 

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal

 

Data 00: High channel data

 

code)

 

 

 

 

 

 

 

 

Data 01: Low channel data

 

*Refer to “Real data mapping”.

 

ex.

 

Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]

 

No.47 00 2F (2FH)

 

 

 

 

 

 

 

 

 

 

No.394 01 8A (18AH)

16. Balance (Command: k t)

 

 

 

 

 

 

 

 

DTV No.0 Don’t care

 

To adjust balance.

 

 

 

 

 

 

 

 

Data 02:

 

You can also adjust balance in the AUDIO menu.

 

0x00: Analog Main

 

 

 

 

 

 

 

 

 

 

0x10: DTV Main

 

Transmission [k][t][ ][Set ID][ ][Data][Cr]

 

 

 

 

 

 

 

 

0x20: Radio

 

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal

 

 

 

0x80: CATV Main

 

code)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Channel data range

 

*Refer to “Real data mapping”.

 

 

 

Analog air: Min 02 - Max 45 (2 - 69)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Analog cable: Min 01 - Max 7D (1 - 125)

 

Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]

 

 

 

 

 

 

 

 

 

 

Digital: Min 01 - Max 3E7 (1 - 999)

17.Color Temperature (Command: x u) To adjust color temperature.

You can also adjust color temperature in the PICTURE menu.

Transmission [x][u][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to “Real data mapping”. Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]

Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] Digital: Min 00 - Max 7DH

22.Channel Add/Del (Command: m b) To add and delete the channels. Transmission [m][b][ ][Set ID][ ][Data][Cr]

Data 00: Channel Delete Data 01: Channel Add Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]

Page 90
Image 90
LG Electronics 50PT490E owner manual OSD Select Command k l ISM Method Command j p, Remote Control Lock Mode Command k m