10INTRODUCING YOUR DRYER
Control panel features
Following are instructions for starting and using your new dryer. Please refer to specific sections of this manual for more detailed information.
wWARNING
To reduce the risk of fire, electric shock, or injury to persons, read this entire manual, including the Important Safety Instructions, before operating this dryer.
FA
EG D B C
APOWER ON/OFF BUTTON
Press to turn the dryer ON. Press again to turn the dryer OFF.
NOTE
Pressing the ON/OFF button during a cycle will cancel that cycle and any load settings will be lost.
BCYCLE BUTTON
Press the CYCLES button to select the desired cycle. Once the desired cycle has been selected, the standard presets will be shown in the display. On MANUAL DRY cycles, these settings can be adjusted using the cycle setting buttons anytime before starting the cycle.
DMORE TIME/LESS TIME BUTTONS
To adjust the drying time, use these buttons with MANUAL DRY, TIME DRY cycles.
Press the MORE TIME button to increase the selected manual cycle time by a minute; press LESS TIME to decrease the cycle time by a minute.
ECYCLE SETTING BUTTONS
Use these buttons to select the desired cycle settings for the selected cycle. The current settings are shown in the display. Press the button for that option to view and select other settings.
| F TIME AND STATUS DISPLAY |
C START/PAUSE BUTTON | The display shows the settings, estimated time |
remaining, options, and status messages for your dryer. |
Press this button to START the selected cycle. If the dryer is running, use this button to PAUSE the cycle without losing the current settings.
NOTE
If you do not press the START/PAUSE button to resume a cycle within 4 minutes, the dryer turns off automatically.
GOPTION BUTTONS
The OPTION buttons allow you to select additional cycle options. Certain buttons also allow you to activate special functions by pressing and holding the button for 3 seconds.
