LG Electronics DVT589H owner manual Adjust the time settings

DV589H-E.BFRALLK_6716_ENG 1/26/10 7:45 PM Page 11

Channel Class – This option allows you to set the favorite channel.

Use v V select the a channel and press ENTER to set the favorite class on each channel (shows Fav icon on top of the screen).

Channel Edit – This option allows you to edit the channels.

[Add]: This option allows you to add a new channel. Use v V to select the channel and press ENTER to add the selected channel.

[Select]: This option allows you to delete or move the preset channels. To move the location of the preset channel, use v V b B to highlight the channel you want to move on the [Move] column and press ENTER.

Use v V to move the selected channel to the desired position and then press ENTER to complete move.

To delete a preset channel, use v V b B to highlight the channel you want to delete on the [Delete] column and press ENTER. The x marked channel will not be displayed on the channel list. Press ENTER again to clear the x mark.

Aspect Ratio – Selects the aspects ratio of the connected TV.

[4:3 PS]: Select this when connecting to a standard 4:3 screen TV and prefer the wide picture on the entire screen cuts off the portions that do not fit.

[4:3 LB]: Select this when connecting to a standard 4:3 screen TV and prefer the wide picture with bands on the upper and lower portions of the screen. [16:9]: Select this when connecting to a wide-screen TV.

Antenna Feed 5V – If you are using an indoor antenna, use one with a signal amplifier rated at DC 5 V, 100 mA and set this option to [ON].

[ON]: Power is supplied to the connected antenna.

[OFF]: The unit does not supply power to the connected antenna.

Adjust the time settings

Set the channel that broadcasts a clock signal and the clock will be set auto- matically. If the clock that has automatically set is different with your local clock, you can adjust time using [Time Offset] option (For example, when summer time is started in local area.). Press B to select [Time Offset] option. Press v V to select a value then press ENTER (Off, +/-30 min, +/-60 min, +/-90 min, +/-120 min). Select “Off” if the clock that has automatically set is identified with your local clock.

Adjust the lock settings

To access the Change Pin, Channel Lock, Parental Guidance options, you must enter the 4-digit password. If you have not yet entered a password you are prompted to do so. Enter a 4-digit password. Enter it again to verify. If you make a mistake while entering number, press CLEAR to delete numbers.

If you forget your password, you can reset it. Display the SETUP menu. Input ‘210499’ and press ENTER. The password has now been cleared.

Change Pin – Changes the password.

Enter the new password twice after entering the current password.

Channel Lock –You can lock certain unsuitable channels to prevent children from accessing them, use v V to select a channel you want to lock and then press ENTER to lock the channel. If you want to watch a locked channel. You should input the password.

11