9

Adjust the Disc playback settings - more you

can do

When you turn on for the first time (optional)

The menu for a language selection will appear when you turn on the unit for the
first time. You must select a language to use the unit. Use vV bB to select a
language then press ENTER and the confirm menu will appear. Use bB to
select [Enter]then press ENTER.

Adjust the language settings

Menu Language – Select a language for the Setup menu and on-screen
display.
Disc Audio/Subtitle/Menu – Select a language for the Disc Audio/Subtitle/
Menu.
[Original]: Refers to the original language in which the disc was recorded.
[Other]: To select another language, press number buttons then ENTERto
enter the corresponding 4-digit number according to the language code list
(see page 20). If you make a mistake while entering number, press CLEAR
to delete numbers then correct it.
[Off] (for Disc Subtitle): Turn off Subtitle.

Adjust the display settings

TV Aspect – Select which screen aspect to use based on the shape of your TV
screen.
[4:3]: Select when a standard 4:3 TV is connected.
[16:9]: Select when a 16:9 wide TV is connected.
Display Mode – If you selected 4:3, you’ll need to define how you would like
widescreen programs and films to be displayed on your TV screen.
[Letterbox]: This displays a widescreen picture with black bands at the top
and bottom of the screen.
[Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary.
TV Output Select – Select an option according to the TV connection type.
[RGB]: When your TV is connected with the SCARTjack.
[YPbPr]: When your TV is connected with the COMPONENT/ PROGRES-
SIVE SCAN OUTPUTjacks on the unit.

Adjust the audio settings

Dolby Digital / DTS / MPEG – Selects the type of digital audio signal when
using the DIGITALAUDIO OUTPUT jack.
[Bitstream]: Select this when you connect this unit’s DIGITALAUDIO
OUTPUTjack to an amplifier with a built-in Dolby Digital, DTS or MPEG
decoder.
[PCM] (for Dolby Digital / MPEG): Select this when you connect this unit’s
DIGITALAUDIO OUTPUT jack to an amplifier without a built-in Dolby Digital
or MPEG decoder.
[Off] (for DTS): Select this when you connect this unit’s DIGITALAUDIO
OUTPUTjack to an amplifier without a built-in DTS decoder.
Sample Freq. (Frequency)– Selects the sampling frequency of the audio
signal.
[48 KHz]: The audio signals are always converted to 48 KHz.
[96 KHz]: The audio signals are output in their original format.
Adjust the Disc playback settings

1 Select the disc mode: MODE

2 Display setup menu: SETUP

3 Select a desired option on the first level: vv VV
4 Move to second level: BB
5 Select a desired option on the second level: vv VV
6 Move to third level: BB
7 Change the setting: vv VV/ ENTER

ON REMOTE

Selecting an operating mode

You must select one of the operating modes before operating.
Press MODE repeatedly to change the mode among DVB-T, DAB or Disc.
Disc:You should select the Disc mode before using playback functions or
disc setup setting.
DVB-T:You should select the DVB-T mode before watching TV channel or
using TV setup setting.
DAB:You should select the DAB mode before listening to the radio or using
radio setup setting.

DV589H-E.BFRALLK_6716_ENG 1/26/10 7:45 PM Page 9