Function
Screen Capture Function
1.Press the MENU button. Then, move to OPTION with the ∧, ∨, ＜, ＞ buttons and press the ◉OK button.
2.Press the ∧, ∨ buttons to move to Screen Capture and press the ◉OK button.
• It can only be elected when there is an input signal. • It takes up to 2 minutes when capturing screen.
• Press the BACK button to exit the menu screen.
OPTION | ꔂMove ꔉOK |
Menu Language | : English |
Blank Image | : Blue |
Screen Capture |
|
LED Mode | : Normal |
Auto Power | : Off |
Demo Mode | : Off |
Initial Setting | : Home Use |
To adjust the brightness of the screen
1.Press the Q.MENU button on the remote control.
2.Press the ＜, ＞ buttons to move to LED Mode.
3.Move to a desired item with the ＜, ＞ buttons.
• LED Mode changes into Dimming mode automatically at specific temperatures (37°C or higher). Dimming mode gets about 90% brightness of original led mode.
• LED Mode changes into Dimming mode automatically if use a optical battery. • You can use this function through the MENU button.
• Press the BACK button to exit the menu screen.
LED Mode
Normal |
To make the power of the projector turn on automatically when power is in
1.Press the MENU button. Then, move to OPTION with the ∧, ∨, ＜, ＞ buttons and press the ◉OK button.
2.Press the ∧, ∨ buttons to move to Auto Power and press the ◉OK button.
3.Press the ∧, ∨ buttons to move to On and press the ◉OK button.
OPTION | ꔂMove ꔉOK |
Menu Language | : English |
Blank Image | : Blue |
Screen Capture |
|
LED Mode | : Normal |
Auto Power | : Off |
Demo Mode | : Off |
Initial Setting | : Home Use |
• On: Connecting DC cable to the projector turns on the projector.
• Off: Connecting DC cable to the projector makes the projector in standby state. • Press the BACK button to exit the menu screen.
28
