Function
Auto Configure Function
*This function assures you of getting the best video quality by automatically adjusting the horizontal size and synchronization of the image.
*Auto Tracking function works in RGB PC input only.
Press the AUTO button of the remote control.
• | If you execute screen adjustment for a video from PC graphic signal, optimal | Auto config. |
| state may not be found. Execute the Auto Config. function for a still image. | |
|
| |
• | You can use this function through the MENU button. |
|
RGB Config. Function
1. Press the MENU button. Then, move to SCREEN with the |
∧, ∨, ＜, ＞ buttons and press the ◉OK button. |
RGB Config. | ꔂMove ꕉ Prev. |
2. | Press the ∧, ∨ buttons to move to RGB Config. and press |
| the ◉OK button. |
3. | Move to a desired item with the ∧, ∨ buttons and then |
| press the ＞ button. |
4. | Press the ∧, ∨, ＜, ＞ button to adjust the screen condi- |
| tion as you want and then press the ◉OK button. |
Resolution ꔃ
Auto Config.
Position
Size
Phase
Reset
ꔐ1024 x 768 1280 x 768 1360 x 768
• Resolution can be chosen between 768 resolution (1024x768/1280x768/1360x768, 60Hz). • Press the BACK button to exit the menu screen.
Using the Still Function
1.Press the STILL button on the remote control.
*You can freeze the moving image.
< Moving Image > | < Still Image > |
2.To exit STILL, press any button.
*The STILL function will release automatically after approximately 10 minutes.
21
