
Chapter 4 - Remote Configuration
Changing the Remote Escape Character
To increase security, you can change a remote modem’s remote configuration escape character. The remote configuration escape character is stored in register S9. The factory default is 37, which is the ASCII code for the percent character (%). Setting S9 to 0 (zero) disables remote configuration
1.Establish a remote configuration link with the remote modem as described in “Basic Procedure.”
2.Type ATS9=n, where n is the ASCII code for the new remote configuration escape character, then press ENTER.
3.Save the new value by typing AT&W and clicking ENTER.
4.Type ATO<CR> to exit remote configuration.
MT5634ZLX/FE | 49 |