19
Chapter 2 - Quick Start
MT5634ZLX/FE
8. Once the files have been copied to the system, Windows detects new hardware and displays
the New Hardware Found screen (indicating that it has found the new modem card), and
then displays the Copying Files screen. Once completed, the Insert Disk screen is
displayed.
Insert the Windows 98 CD and click OK.
9. The Add New Hardware Wizard dialog box is displayed.
Click Finish to complete the installation of the network interface card.
10. The Copying Files screen displays indicating that the files are being copied to the system.
When completed, the screen disappears.
11. Remove the Windows 98 CD and the driver disk from the floppy drive.
At this point, the Link Light and the Activity light on the Ethernet LAM should be steady green.
12. To complete the installation, reboot the computer.
NOTE: Before rebooting, you need to ensure that the appropriate networking clients, protocols,
and/or services are present. Go to Control Panel | Network and then to the Configuration tab
to make the appropriate selections.