14
MultiMobile User Guide
MT5634ZLX/FE
Installing the MT5634ZLX/FE Card
To install your MT5634ZLX/FE (refer to Figure 2-4), perform the following steps:
1. Verify that your PC meets the system requirements in Chapter 1.
2. Insert the MT5634ZLX/FE card into the computer’s PCMCIA slot with the 68-pin connector
facing the PCMCIA slot and the label facing up.
3. For DOS or NetWare client environments, run the menu-driven Install Utility; in other client
environments, go to step 4.
4. Plug the 15-pin MODEM-LAM into the 15-pin Modem socket of the PC card; connect the
other end of the MODEM-LAM to the telephone system (PSTN) by plugging an RJ-11 cable
plug into the MODEM-LAM’s 6-pin RJ11 receptacle and plug the other end of the RJ11 cable
into an available PSTN receptacle.
5. Plug the 15-pin Ethernet-LAM into the 15-pin Ethernet socket of the PC card; connect the
other end (8-pin RJ-45) of the Ethernet-LAM to the Ethernet LAN using a UTP or STP cable.
6. With the PC powered on, verify MT5634ZLX/FE LED operation. Proceed to the Installing
Driver and Modem Software section.
Keyed Connectors
Act
10/100
Link
Connect to PSTN
Telephone Line
Green
Link Integrity: On
Received: Blink
Green
Acitivity: Blink
Orange
100 Mbps: On
10 Mbps: Off
OH: Off-Hook - Lights to
indicate the unit wants to
do something
CD: Carrier Detect - Lights
when a valid carrier signal
is detected
RD: Receive data - Flashes
when data is being received
TD: Transmit Data - Flashes
when data is being transmitted
10/100M
Fast Ethernet
56K LAN/Modem
PC Card
Press here to release.

ö

÷

Notebook
Connect to LAN
Figure 2-4. MT5634ZLX/FE Installation