Safety Instructions
| Using | WARNING | |
|
|
|
|
If the projector is in a room that experiences a gas leak, do not touch | Always open the lens door or | ||
the projector. |
| remove the lens cap when the | |
|
|
| projector lamp is on. |
It can cause a fire or a burn by a spark.
| Using | NOTES | |
|
|
|
|
Do not place heavy objects on | Take care not to impact the lens | Do not touch the lens of the pro- | |
top of projector. | particularly when moving the | jector. It is delicate and easily | |
|
| projector. | damaged. |
This may cause mechanical failure or personal injury!
Do not use any sharp tools on the projector as this will damage the casing.
In the event that an image does not appear on the screen please switch it off and unplug it from the power outlet and contact your Service Agent.
This may cause a fire or an electric shock hazard or damage to the unit!
Do not drop the projector or allow impact shock.
This may cause mechanical failure or personal injury!
| Cleaning | WARNING |
|
|
|
Do not use water while cleaning the projector.
This may cause damage to the pro- jector or an electric shock hazard.
In the unlikely event of smoke or
astrange smell from the projec- tor, switch it off, unplug it from the wall outlet and contact your dealer or service center.
This may cause a fire or an electric shock hazard or damage to the unit!
Use an air spray or soft cloth that is moist with a neutral detergent and water for removing dust or stains on the projection lens.
| Cleaning | NOTES |
|
|
|
Contact the Service Center once a year to clean the internal parts of the projector.
Accumulated dust can cause mechanical failure.
When cleaning the plastic parts such as projector case, unplug the power and wipe it with a soft cloth. Do not use cleanser, spray water or wipe with a wet cloth. Especially, never use cleanser (glass cleaner), automobile or industrial shiner, abrasive or wax, benzene, alcohol etc., which can damage the product. Use an air spray or soft cloth that is moist with a neutral detergent and water for removing dust or stains on the projection lens.
It can cause fire, electric shock or product damage (deformation, corrosion and damage).
| Others | WARNING |
|
|
|
Do not attempt to service the projector yourself. Contact your dealer or service center.
This may cause damage to the projector and could give an electric Shock as well as invalidating the warranty!
| Others | NOTES |
|
|
|
Do not mix new batteries with old batteries.
This may cause the batteries to over- heat and leak.
Be sure to unplug if the projector is not to be used for a long period.
Accumulated dust may cause a fire haz- ard or damage to the unit!
Only use the specified type of battery.
This could cause damage to the remote control.
6
