LG Electronics LA120HPO, LA090HPO, LA120CPO, LA120HPI, LA120CPI How to replace picture & photograph

How to replace picture & photograph

How to replace picture & photograph

1. Turn off power and then open the upper part of front panel.

2. Pull out the both links of lower part of front panel, as described in the below picture.

3. Push and close the top part of the front panel and then pull the bottom part of the panel forward until it is secured.

4. Take out picture.	5. Turn upside-down of the
	picture and turn over mat, then
	take off a protective tape
	attached at the mat.

6. Place the picture/photograph between the exited picture and mat. (Recommended size of a photo/picture: 450mm x 450mm)

Protective tape Mat

450mm

Mat

450mm

7. Cover mat and press down with hand(s) until contacting closely.

8. Slide the photo graph/drawing requested under both hanger parts as following, and fix them. Press the front panel lightly to close.

9. Push both links of lower part of panel inside and fix it. Then turn on.

In case a mat is not used, recommended size of a photo/picture: 522mm x 522mm

When powering on after replacing filter and picture, the front panel doesn't intervene.

522mm

522mm

Service Manual 35