LG Electronics LA120HPO, LA090HPO, LA120CPO Disassembly, To remove the Grille from the Chassis

Disassembly

Disassembly

Indoor Unit

WARNING: Disconnect the unit from power supply before making any checks. Be sure the power switch is set to "OFF"

1. To remove the Grille from the Chassis.

-Pull the grille bottom, the remove 2 securing screws.

-Lift the both lower parts of panel front.

-After pull down this panel a bit, separate connecting wire with product.

Panel Front

Connector

2. To remove the Control Box.
- Before removing the control box, be sure to	Communication Connector
disconnect the wires from PWB.
	Step Motro Connector
- Pull the cover control out from the control box
	Front Panel Connector
and disconnect other wires.
- Remove securing screws.	Motor Connector
- Pull the control box out from the chassis carefully.
	Sensor Connector
	Service Manual	45