78045 LG Dshwshr OM ENSPv08.qxd 4/2/08 10:28 PM Page 10
O P E R AT I N G I N S T RU C T I O N S
QUICK START
1 LOAD THE DISHES | 5 SETTING THE CYCLE |
Remove any scraps of food in advance. Pull the lower rack out and load the dishes and silverware and push it all the way back in. Pull the upper rack out and load the cups, glasses, etc.
2CHECK RINSE AID
The indicator lights will illuminate if the rinse aid level is low.
Select the desired cycle and options. Before starting, the display window will show the estimated running time of the selected cycle.
The estimated remaining time will be displayed. If the door is opened during operation, the dishwasher stops. Once the door is closed, the cycle will restart from the point where it stopped.
3MEASURE THE DETERGENT
Add the required amount of detergent to the dispenser. Close the detergent dispenser lid.
6CLOSE THE DOOR
The dishwasher starts automatically after a slight delay.
4TURN ON THE DISHWASHER
When ready to run a cycle, open the door and press the Power button. The dishwasher defaults to the normal cycle.
7AT THE END OF THE CYCLE
End is displayed on the digital display for a few seconds and a tone will sound, signaling completion of the cycle. The dishwasher automatically switches off for safety and energy savings.
wCAUTION
Empty the lower rack first and then the upper rack. This will avoid water dripping from the upper rack onto dishes in the lower rack.
AUTO-OFF
The dishwasher will automatically turn off if a cycle is not selected or if the door is not closed within 10 minutes.
wWARNING
In general, it is not advisable to open the door while the dishwasher is in operation. If the door is opened, a safety device stops the dishwasher. Care should be taken when opening the door immediately following the cycle, as steam may escape.
10
