Figure 38
Spraying |
Tube |
Pump |
assembly |
Tube #1 |
Rubber |
elbows(3) |
Tube #2 |
15. Assembly the unit back following the reverse order of disassembly.
NOTE: All tube should be inserted into rubber elbows by at least 1/2 inch
Figure 39
14. Connect the condensate pump to the ICR | Figure 40 |
relay of the terminal of the board as shown |
|
in fig. 40 Make sure to fasten the pump |
|
wire through the wire clip on the back side |
|
of the control barrier as shown in fig. 39 |
|
Copyright ©2008 LG Electronics. Inc. All right reserved. | - 27 - |
Only for training and service purposes | LGE Internal Use Only |
|
