USING YOUR REFRIGERATOR
ENSURING PROPER AIR CIRCULATION
In order to ensure proper temperatures, air MUST flow between the refrigerator and freezer sections.
•Cool air enters the freezer through the vents located at the top of the compartment and exits through the vents located behind the freezer drawers.
•Cool air from the freezer section enters the fresh food section through vents located at the top of the compartment. The air moves down throughout the compartment and exits through the vents located behind the crisper drawers.
freezer compartment to ensure proper cooling. Your refrigerator is now ready for use.
CONTROL PANEL FEATURES
Press the button for the desire function to review and select other settings.
•Do not block any of these vents with food packages. If the vents are blocked, airflow will be interrupted and temperature and moisture problems may occur.
IMPORTANT: Because air circulates between both sections, any odors formed in one section will transfer to the other.
You MUST thoroughly clean both sections to eliminate odors. To prevent odor transfer and dried out food, wrap or cover foods tightly. (See the “Food Storage Guide” section for details.)
NOTE: If you close the refrigerator door, you may see the freezer door open and close again due to pressure from internal air flow.
PRIOR TO USE
1.Clean your refrigerator thoroughly and wipe off dust accumulated during shipping.
2.Install accessories such as ice cube bin, drawers, shelves, etc., in their proper places. They are packed together to prevent possible damage during shipment.
3.Let your refrigerator run for at least 2 or 3 hours before putting food in it. Check the flow of cold air in the
REFRIGERATOR AND FREEZER CONTROLS
Initially set the refrigerator and freezer controls to the recommended (middle) settings by pressing REFRIGERATOR Graphic and FREEZER Graphic.
NOTE: When changing control settings, wait 24 hours before making additional adjustments. After 24 hours, adjust the compartments temperatures as desired . The more lit bars, the colder the refrigerator and freezer will be.
Display Off Mode
The display lights up and stays lit when the refrigerator is plugged in for 60 seconds. After the display lights all off except the dispenser icon selected (CRUSH, WATER or CUBE) and the display only lights when door is opened or display button is pressed. Display turn off 20 seconds after door is closed or display button pressed. You can change the display always ON pressing “FREEZER” and “ICE PLUS” buttons at the same time for 5 seconds. A tone will sound indicating that the display is ON (Display Off Mode Deactivate).
Activate the Display Off Mode in same manner as deactivation.
ICE TYPE
You can select water or ice.
Select Water, Crushed Ice or Cubed Ice by pressing the ICE TYPE button to the selection desired. The Water, Crushed Ice or Cubed Ice icon will light up to indicate selection.
CUBE Light up the cubed ice lamp by pressing the 
selection button. The icon will be illuminated.
Light up the water lamp by pressing the selection button. The icon will be illuminated.
13
