LG Electronics M1950D, M2450D Lifting and moving the Monitor set, Setting up the Monitor set

10ASSEMBLING AND PREPARING

ENGLISH

Lifting and moving the Monitor set

When moving or lifting the Monitor set, read the following to prevent the Monitor set from being scratched or damaged and for save transportation regardless of its type and size.

Setting up the Monitor set

Attaching the Stand Base

1Place the Monitor set with the screen side down on a flat and cushioned surface.

CAUTION	CAUTION
	Lay a foam mat or soft protective cloth
Avoid touching the screen at all times, as this	on the surface to protect the screen from
	damage.
may result in damage to the screen or some
of the pixels used to create images.	2 Attach the Stand Base from the set by turning
	the screw to the right with a Coin.

yyIt is recommended to move the Monitor set in the box or packing material that the Monitor set originally came in.

yyBefore moving or lifting the Monitor set, disconnect the power cord and all cables.

yyHold the top and bottom of the Monitor set frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.

Detaching the Stand Base and Body

yyWhen holding the Monitor set, the screen should face away from you to prevent the screen from scratches.

yyWhen transporting the Monitor set, do not expose the Monitor set to jolts or excessive vibration.

yyWhen transporting the Monitor set, keep the Monitor set upright, never turn the Monitor set on its side, or tilt towards the left or right.

1Place the Monitor set with the screen side down on a flat and cushioned surface.

2Turn the screw to the left, and then pull out the Stand Base from the Stand Body.