LG Electronics M2250D, M2450D, M2550D, M1950D, DM2350D owner manual Tidying cables

			ASSEMBLING AND PREPARING 13
Model	M1950D	M2450D	NOTE
	M2250D	M2550D
	M2350D		yyUse the screws that are listed on the VESA
	DM2350D
VESA (A x B)	75 x 75	200 x 100	standard screw specifications.
Standard screw	M4	M4	yyThe wall mount kit includes an installation
Number of screws 4		4	manual and necessary parts.
Wall mount	RW120	RW240	yyThe wall mount bracket is optional. You can
bracket (optional)
			obtain additional accessories from your local
			dealer.
			yyThe length of screws may differ depending
			on the wall mount. Be sure to use the proper
			length.
			yyFor more information, refer to the instructions
			supplied with the wall mount.

ENGLISH

CAUTION

yyDisconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur.

yyIf you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury.

yyUse an authorized LG wall mount and contact the local dealer or qualified personnel.

yyDo not over tighten the screws as this may cause damage to the Monitor set and void your warranty.

yyUse the screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

Tidying cables

Gather and bind the cables with the supplied cable tie.