LG Electronics DM2350D, M2450D Mounting on a table, Remove 2 screws and pull out the Stand Body

3 Remove 2 screws and pull out the Stand Body

ASSEMBLING AND PREPARING 11

WARNING

from the Monitor set.

When you adjust the angle, do not hold the buttom of the Monitor set frame as shown on the following illustration, as may injure your fingers.

ENGLISH

Mounting on a table

1Lift and tilt the Monitor set into its upright position on a table.

Leave a 10 cm (minimum) space from the wall for proper ventilation.

10 cm

10 cm 10 cm

10 cm

CAUTION

Disconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur.

NOTE

Tilt from +10 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view.

- 5 10

2Connect the AC-DC Adapter and Power Cord to a wall outlet.

FrontRear