LG Electronics M1950D, M2450D Brightness Command k h OSD Select Command k l, Colour Command k

ENGLISH

100 EXTERNAL CONTROL DEVICE SETUP

07. Brightness (Command: k h)		11. OSD Select (Command: k l)
	To adjust screen brightness.	To select OSD (On Screen Display) on/off when
	You can also adjust brightness in the PICTURE	controlling remotely.
	menu.
			Transmission
	Transmission		[k][l][ ][Set ID][	][Data][Cr]
		Data 00 : OSD off			01 : OSD on
	[k][h][ ][Set ID][ ][Data][Cr]
	Data Min : 00 to Max : 64
			Acknowledgement
	* Refer to ‘Real data mapping ’. See p.102		[l][ ][Set ID][ ][OK/NG][Data][x]
	Acknowledgement
	[h][ ][Set ID][ ][OK/NG][Data][x]

08. Colour (Command: k i)	12. Remote control lock mode (Command: k m)
To adjust the screen colour. (Except PC mode)	To lock the front panel controls on the monitor and
You can also adjust colour in the PICTURE menu.	remote control.

Transmission

[k][i][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

* Refer to ‘Real data mapping ’. See p.102

Acknowledgement

[i][ ][Set ID][ ][OK/NG][Data][x]

09.Tint (Command: k j)

To adjust the screen tint. (Except PC mode) You can also adjust tint in the PICTURE menu.

Transmission

[k][j][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

* Refer to ‘Real data mapping ’. See p.102 Acknowledgement

[j][ ][Set ID][ ][OK/NG][Data][x]

10.Sharpness (Command: k k) To adjust the screen sharpness.

You can also adjust sharpness in the PICTURE menu.

Transmission

[k][k][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

* Refer to ‘Real data mapping ’. See p.102

Acknowledgement

[k][ ][Set ID][ ][OK/NG][Data][x]

Transmission

[k][m][ ][Set ID][ ][Data][Cr]

Data 00 : Lock off 01 : Lock on

Acknowledgement

[m][ ][Set ID][ ][OK/NG][Data][x]

*If you are not using the remote control, use this mode. When main power is on/off, external control lock is released.

*Local Power Key will work properly.

13.Treble (Command: k r) To adjust treble.

You can also adjust treble in the AUDIO menu.

Transmission

[k][r][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

* Refer to ‘Real data mapping ’. See p.102 Acknowledgement

[r][ ][Set ID][ ][OK/NG][Data][x]

14.Bass (Command: k s) To adjust bass.

You can also adjust bass in the AUDIO menu.

Transmission

[k][s][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

* Refer to ‘Real data mapping ’. See p.102

Acknowledgement

[s][ ][Set ID][ ][OK/NG][Data][x]