LG Electronics M2350D, M2450D, M2250D, M2550D Screen Mute Command k d, Volume Mute Command k e

					EXTERNAL CONTROL DEVICE SETUP 99
01. Power (Command: k a)				03. Screen Mute (Command: k d)
To control Power On/Off of the set.					To select screen mute on/off.
	Transmission		Transmission
	[k][a][ ][Set ID][	][Data][Cr]			[k][d][ ][Set ID][	][Data][Cr]
Data 00: Power Off			Data 01: Power On		Data 00 : Screen mute off (Picture on)
					Video mute off
	Acknowledgement
					01 : Screen mute on (Picture off)
	[a][ ][Set ID][ ][OK/NG][Data][x]
To show Power On/Off.					10 : Video mute on
					Acknowledgement
	Transmission
					[d][ ][Set ID][ ][OK/NG][Data][x]
	[k][a][ ][Set ID][ ][FF][Cr]
					* In case of video mute on only, Monitor Set will
	Acknowledgement
					display On Screen Display(OSD). But, in case of
	[a][ ][Set ID][ ][OK/NG][Data][x]
					Screen mute on, Monitor Set will not display OSD.
*Similarly, if other functions transmit ‘0xFF’ data
	based on this format, Acknowledgement data feed
	back presents status about each function.
*OK Ack., Error Ack. and other message may display
	on the screen when Monitor Set is power On.			04. Volume Mute (Command: k e)
					To control volume mute on/off.
					You can also adjust mute using the MUTE button on
					remote control.
					Transmission
					[k][e][ ][Set ID][	][Data][Cr]
					Data 00 : Volume mute on (Volume off)
02. Aspect Ratio (Command: k c) (Main Picture Size)					01 : Volume mute off (Volume on)
To adjust the screen format. (Main picture format)					Acknowledgement
You can also adjust the screen format using the
					[e][ ][Set ID][ ][OK/NG][Data][x]
Aspect Ratio in the Q.MENU. or PICTURE menu.
	Transmission
	[k][c][ ][Set ID][	][Data][Cr]
Data 01 : Normal screen (4:3)
	02 : Wide screen (16:9)			05. Volume Control (Command: k f)
	04 : Zoom
	06 : Original				To adjust volume.
07 : 14:9					You can also adjust volume with the VOLUME
	09 : Just Scan				buttons on remote control.
	0B : Full Wide
					Transmission
	10 to 1F : Cinema Zoom 1 to 16				[k][f][ ][Set ID][	][Data][Cr]
	Acknowledgement				Data Min : 00 to Max : 64
	[c][ ][Set ID][ ][OK/NG][Data][x]				* Refer to ‘Real data mapping ’. See p.102
* Using the PC input, you select either 16:9 or 4:3
					Acknowledgement
	screen aspect ratio.				[f][ ][Set ID][ ][OK/NG][Data][x]

*In DTV/HDMI (1080i 50 Hz / 60 Hz, 720p 50 Hz / 60 Hz, 1080p 24 Hz / 30 Hz / 50 Hz / 60 Hz), Component( 720p, 1080i, 1080p 50 Hz / 60 Hz) mode, Just Scan is available.

*Full Wide is supported only for Analogue, AV.

06. Contrast (Command: k g) To adjust screen contrast.

You can also adjust contrast in the PICTURE menu.

Transmission

[k][g][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

* Refer to ‘Real data mapping ’. See p.102 Acknowledgement

[g][ ][Set ID][ ][OK/NG][Data][x]

ENGLISH