LG Electronics M2450D, M2250D Programme Add/Skip Command m b Key Command m c, Real data mapping

ENGLISH

102EXTERNAL CONTROL DEVICE SETUP

20. Programme Add/Skip (Command: m b)			21. Key (Command: m c)
	To set skip status for the current Programme.		To send IR remote key code.
	Transmission		Transmission
	[m][b][ ][Set ID][ ][Data][Cr]			[m][c][ ][Set ID][ ][Data][Cr]
	Data 00 : Skip	01 : Add	Data Min : 00 to Max : 64
			* Data Key cod -See p.94
	Acknowledgement
	[b][ ][Set ID][ ][OK/NG][Data][x]		Acknowledgement
				[c][ ][Set ID][ ][OK/NG][Data][x]

Real data mapping

00	: Step 0	Tint
:		Step 0 : R50
A : Step 10 (Set ID 10)		:
:		Step 49 : R1
F : Step 15 (Set ID 15)		Step 50 : 0
10	: Step 16 (Set ID 16)	Step 51 : G1
	:	:
64	: Step 100	Step 100 : G50
	:
6E : Step 110		Balance
	:
73	: Step 115	Step 0 : L50
74	: Step 116	:
	:	Step 49 : L1
CF : Step 199		Step 50 : 0
	:	Step 51 : R1
FE : Step 254		:
FF : Step 255		Step 100 : R50

Colour Temperature

Step 0 : W50

:

Step 49 : W1

Step 50 : 0

Step 51 : C1

:

Step 100 : C50

22.Back Light (Command: m g) To Control the back light.

Transmission

[m][g][ ][Set ID][ ][Data][Cr]

Data : data Min: 00 to Max: 64

Acknowledgement

[g][ ][Set ID][ ][OK/NG][Data][x]

23.Input select (Command: x b) (Main Picture Input) To select input source for main picture.

Transmission

[x][b][ ][Set ID][ ][Data][Cr]

Data Structure
Data 00: DTV	40: Component
10: Analogue	60: RGB
20: AV	90: HDMI

Acknowledgement

[b][ ][Set ID][ ][OK/NG][Data][x]