LG Electronics M2450D Using the input list, Selecting an input source, Adding an Input label

36WATCHING TV

ENGLISH

Using the input list

Selecting an input source

1Press INPUT to access the input source list.

-The connected device displays on each input source.

2Press the Navigation buttons to scroll to one of the input sources and press OK.

Input source	Description
Antenna or	Watch TV over the air, cable, and
Cable	digital cable broadcast
RGB	View a PC display on the screen
AV	Watch the contents in a VCR or
	other external devices
Component	Watch the contents in a DVD or
	other external devices, or through
	a digital set-top box
HDMI	Watch contents in a PC, DVD
	or Digital settop box other high
	definition devices

The connected input sources display in black and the disconnected input sources in grey.

-If you add an input label to each input sources, you can easily identify a device connected to each input source.

Adding an Input label

1Press MENU to access the main menus.

2Press the Navigation buttons to scroll to OPTION and press OK.

3Press the Navigation buttons to scroll to Input Label and press OK.

4Press the Navigation buttons to scroll to one of the input sources.

5Press the Navigation buttons to scroll to one of the input label and press OK.

6When you are finished, press EXIT.

When you return to the previous menu, press BACK.

NOTE

yyIf you want to use HDMI-PC mode, you must set the input label to PC mode.

NOTE

yyThe OSD (On Screen Display) is displayed on the screen as shown below.

»» When turning the product on in HDMI input. »» When switching to HDMI input.

»» When connecting an HDMI cable with no signal.

Is the input connected to your PC?

Yes No

Do not show message again.

yyIf you select "Yes" the size and image quality are optimised for your PC.

yyIf you select "No" the size and image quality are optimised for the AV device (DVD player, set-top box, gaming device).

yyIf you select "Do not show message

again" this message does not appear until the monitor is reset. You can change the set value in Menu ► OPTION ► Input Label. yyThe values set for HDMI1/HDMI2 are saved

independently.(Only DM2350D Model)