26System Setting
3
System Setting
VCR Play Aspect
You can choose:
[AUTO]
Automatically plays back
[4:3]
Only for playing back Normal format recordings (4:3).
[16:9]
Only for playing back
VCR Play System
Your video recorder uses triple colour standards, Auto, PAL and MESECAM. During play your video recorder should select the colour system automatically, however if you experience problems you may need to do it manually.
Video output format
Select the Video output format option according to the connection type of this unit.
[YPbPr]
When your TV is connected with the COMPONENT OUTPUT jack on this unit.
[RGB]
When your TV is connected with the
SCART(RGB signal) jack on this unit.
Antenna Feed 5V
If you are using indoor antenna with a signal amplifier rated at DC 5V, 100mA, the recorder can supply power through ANTENNA IN jack.
1.Display [Setup] menu.
2.Use a/d/s/wto select the [Antenna Feed 5V], and press ENTER (b).
3.Use w/sto select [ON] and press ENTER (b) to supply antenna power.
,,Note
The [Antenna Feed 5V] option must be set to [OFF] when your indoor antenna is supplied the power from the mains. If you set the [Antenna Feed 5V] option to [ON] for the indoor antenna which is supplied power from the mains, it may cause serious defect to this unit.
Initialization
You can reset the recorder to its original factory settings.
[Factory Set] If you need to, you can reset the recorder to all its factory settings. Some options cannot be reset. (DVD Rating, Password, and Area Code) Select [Factory Set] icon then press ENTER (b) and auto setup menu will appear, see page 21.
1.Select [Initialization] option then press d.
2.Press ENTER (b) and then confirm message will appear.
3.Use a/dto select [Yes] or [No] then press ENTER (b).
,,Note
This option can be changed only when the resolution is set to 576i.
| 11. 2. 1. �� 12:12 |
