*TD5130_eng 1/12/06 5:57 PM Page 15
Chapter 2 Basic Functions
Turning the Phone On and Off
Turning the Phone On
1)Install a charged battery pack or connect the phone to an external power source such as the cigarette lighter charger, car kit or AC Adaptor.
2)Hold down the Key 
for 2 seconds until the LCD screen flashes.
Note As any other communication device, avoid any unnecessary contact with the antenna while your phone is turned on.
Making a Call
Every time you make a call, follow these steps:
1)Make sure that the phone is turned on. If not, hold
down 
for 2 seconds.
2)Type the phone number and then press 
.
•If the phone is locked, type the lock code (see page 62).
3)To end the call, press 
.
Note In no service area, 
appears from the screen. When trying voice call in no service area, “Call not completed. Please try again” is displayed. It means you are in no service area.
BASIC FUNCTIONS
15
