Inspection and Installation

Figure 15 Attaching sling to a 6-fan or 8-fan unit for moving

Step 4

Step 5

Six-fan unit shown for illustration.

Method for 8-fan condenser is the same.

3.5.2Mounting the Condenser

The condenser must be installed so that it is level within 1/2" (13mm) to ensure proper refrigerant flow. For roof installation, mount the condenser on suitable curbs or other supports; follow all local and national codes. Secure the legs to the mounting surface using a field-supplied 1/2" (13mm) diame- ter bolt in each of the two 5/8" (16mm) holes in each leg. See Figures 3, 4 and 5 for anchor dimen- sions.

17

Page 21
Image 21
Liebert 308 415, 83, 205 251, 104 165, 1010 manual Mounting the Condenser, Attaching sling to a 6-fan or 8-fan unit for moving