Life Fitness 8500 3 manual PEC Cable

48

82

46 PEC CABLE

67

3/8 X 2” 89 50

FIGURE 29 26

STEP 29:

•Assemble one 4-1/2” PULLEY (48) around the PEC DEC CABLE (46) and to the PULLEY BRACKET (26) using one 3/8 X 2” BOLT (89), two 3/8” WASHERS (80), two 2-7/8 X 1” CABLE CLIPS (67) and one 3/8” LOCKNUT (82) as shown in FIGURE 29.

STEP 30:

•Slide the ends of the PEC DEC CABLE

(46)into the bushings on the PEC CAMS

(28)as shown on FIGURE 30.

•Lay the PEC DEC CABLE (46) over the pulleys and under the cable retaining clips in the CENTER PULLEY BRACKET (27) as shown in FIGURE 30. (NOTE: Securely tighten the pulley connections in the CENTER PULLEY BRACKET (27). The cable retaining clips should be at ap- proximately a 45° angle.)

27

46

28

PEC 46

CABLE

FIGURE 30

25