Life Fitness 8500 3 manual Detail

SEE DETAIL 31

FIGURE 31

STEP 31:

29

50

45 AB CABLE

82

69

90 3/8 X 2-3/4” 48

DETAIL 31

•Securely assemble the ball end of the AB CABLE (45) and one 4-1/2” PULLEY (48) to the FRONT UPRIGHT (29) using two 3/8 X 2-3/4” BOLTS (90), two 3/8” FLANGE SPACERS (69), two 3/8” WASHERS (80), and two 3/8” LOCKNUTS (82).(NOTE: The AB CABLE (45) should be routed underneath the retaining bolt as shown in DETAIL 31.)

			82		26
STEP 32:				AB CABLE 45
• Route the AB CABLE (45) around the FLOATING PULLEY				80
BRACKET (55) using one 4-1/2” PULLEY (48), one 3/8 X 2”
				67
BOLT (89), two 2-7/8 X 1” CABLE CLIPS (67), two 3/8” WASH-
ERS (80), and two 3/8” LOCK NUTS (82). See FIGURE 32.
• Screw the threaded end of AB CABLE (45) approximately 1” into					55
the end of the PULLEY BRACKET (26) and tighten jam nut se-
curely as shown in FIGURE 32.
IMPORTANT! Make sure the cables are running
	in the grooves of all pulleys.
							3/8 X 2” 89
							FIGURE 32
0	1/2	1/2	1/2	1/2	1/2		1/2
	1	2	3		4	5	6
			26