Life Fitness 95Xe T 6

6SERVICE AND TECHNICAL DATA

The Total Body Trainer is backed by the engineering excellence of Life Fitness and is one of the

most rugged and trouble-free pieces of exercise equipment on the market today. Commercial

Life Fitness products have proven to be durable in health clubs, colleges, and military facilities

the world over. This same technology, engineering expertise, and reliability have gone into the

Total Body Trainer.

NOTE: The safety of the equipment can be maintained only if the equipment is examined regu-

larly for damage or wear. Keep the equipment out of use until defective parts are repaired or

replaced. Pay special attention to parts that are subject to wear as outlined in the Preventive

Maintenance Schedule.

REMARQUE : pour conserver un matériel sûr, il convient de l'inspecter régulièrement afin de

déceler tout signe d'usure ou d'endommagement. N'utilisez pas l'appareil tant que les pièces

défectueuses n'ont pas été réparées ou remplacées. Portez une attention toute particulière aux

pièces qui s'usent, comme indiqué ci-dessous.

The following preventive maintenance tips will keep your Total Body Trainer operating at peak

performance:

• Locate the Total Body Trainer in a cool, dry place.

• Clean the top surface of the pedals regularly.

• Keep the display console free of fingerprints and salt build-up caused by sweat.

• Use a 100% cotton cloth, lightly moistened with water and mild liquid detergent, to clean the

Total Body Trainer. Other fabrics, including paper towels, may scratch the surface. Do not

use ammonia, chlorine, or acid-based cleaners.

• Long fingernails may damage or scratch the surface of the console; use the pad of the fin-

ger to press the selection buttons on the console.

• Clean the housing and moving arms thoroughly on a regular basis.

NOTE: When cleaning the exterior of the unit, a non-abrasive cleaner and soft cotton cloth are

strongly recommended. At no time should cleaner be applied directly to any part of the equip-

ment; apply the non-abrasive cleaner on a soft cloth and then wipe the unit.