42
7SPECIFICATIONS
7.1 LIFE FITNESS 95XEFIT STRIDETM TOTAL BODY TRAINER
Designed use: Heavy/Commercial
Maximum user weight: 350 pounds / 160 kilograms
Power Requirements: Refer to Section 1.3 - Setup, Electrical Power Requirements
Upper Touchscreen: 12.1 in. Diagonal, 800 x 600 TFTLCD
Channel coverage: VHF: 2-13/UHF: 14-69/CATV: 1-125
Antenna: 75-ohm external antenna terminal for VHF/UHF
(>43dBuV (@75ohm) or > 65.8dBm)
Headphone Jack: 300 milliwatt, 3.5mm Stereo
Broadcast Capabilities: NTSC-M or PAL-I, PAL-B/G, SECAM-L
Control Panel: Arrow keys, screen lock and unlock, Cooldown, Quick Start, and TV controls.
Screens: Workout Selection, Workout Setup and Workout Progress Screens
Information Displayed: Distance, Mode (Aerobics or Reverse), Calories, CAL/HR, *Watts, METs, Elapsed
Time (or Remaining Time, or Hidden Time), Time in Zone, Level, Speed, and
Target Heart Rate (for heart workouts), TV (on, zoom).
Summaries: Total elapsed time of workout, total calories burned, total distance, and time in
zone (when applicable.)
Workouts: Quick Start, Fat Burn, Manual, Random, Cardio, and Hill. Zone Training including: Heart
Rate Hill, Heart Rate Interval, and Heart Rate Extreme. Hill Plus including: Around the
World, Foothills, Kilimanjaro, Interval, Cascades, and Speed Training. Personal Trainer
including: Cross-Train Aerobics, Cross-Train Reverse, and Life Fitness Fit Test.
Heart rate monitor: Lifepulse system sensors and Polar®telemetry heart rate monitoring system Polar®
heart rate chest strap: optional
Resistance Levels: 26 (0 to 25, speed-independent)
Pedal speed range: 1.5 mph-14.3 mph (2.4 km/h-23.0 km/h)
Drive type: Belt/alternator
Accessory Tray: Standard
Integrated Reading Rack: Standard
Color: Silver with gray accents
Ports (1): Type RJ45 Network ready connection
CATV (1): F-type connector
PHYSICALDIMENSIONS: SHIPPING DIMENSIONS:
Length: 84.75 inches / 215 centimeters Length: 85.75 inches / 217.8 centimeters
Width: 26.5 inches / 67 centimeters Width: 29.75 inches / 75.6 centimeters
Height: 64 inches / 162.5 centimeters Height: 50.75 inches / 128.9 centimeters
Weight: 286 pounds / 130 kilograms Weight: 390 pounds / 176.9 kilograms
For EN 957-9 class Aaccuracy testing, input mechanical power was measured by connecting a cross-trainer to a fixture consisting of a motor and gear
box with an attached torque transducer, amplifier, and readout display. Testing was done by removing the pedal lever from one side of the cross trainer
and connecting the test fixture in place of the pedal lever at the crank axis. Torque measurements were taken with and without the pedal lever installed
on the other side of the cross-trainer in order to determine the level of measured torque required to compensate for the missing pedal lever. From mea-
sured torque and speed, the input mechanical power and variance from displayed power were calculated. At level 12 and a constant 65 RPM, displayed
wattage was 133 watts, with a 4.69% variance from input power on the test equipment. At level 12 and a constant 75 RPM, displayed wattage was 133
watts, with a 4.07% variance from input power on the test equipment.