73 | |
75 | |
76 | |
21 | |
62 3/8 X 1-3/4” | (43m) |
78 | |
38 | |
| 38 |
| 73 |
| 76 |
| 78 |
| 75 |
| 62 3/8 X 1-3/4” |
45 | (43m) |
|
1 | |
FIGURE 32 | |
STEP 32:
•Route the LEG CABLE (45) around one 4-1/2” PULLEY (38) and assemble the PULLEY (38) to the lower holes of the two DUAL PULLEY PLATES (21) using two RH CAPS (78), one 3/8 X 1-3/4” BOLT (62), two 3/8” SAE WASHERS (75), two 3/8” RH WASHERS (76) and one 3/8” LOW HEIGHT LOCK NUT (73) as shown in FIGURE 32.
•Route the LEG CABLE (45) around a 4-1/2” PULLEY (38) and assemble it to the bracket on the BASE (1) using four RH CAPS (78), two 3/8 X 1-3/4” BOLTS (62), four 3/8” SAE WASHERS (75), four 3/8” RH WASHERS (76) and two 3/8” LOW HEIGHT LOCK NUTS (73) as shown in FIGURE 32.
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
0 | 1/2 | | 1 | 1/2 | 2 | | 1/2 | 3 | | 1/2 | 4 | | 1/2 | | 5 | 1/2 | 6 |
10 | | 20 | 30 | 40 | 50 | 60 | | | 70 | | 80 | 90 | 100 | | 110 | 120 | 130 | 140 | 150 | |
| | | | | | |
22
